Product Reviews

SMALLRIG Universal Phone Holder Mount 4382 Review

A flexible phone clamp for creators who want portrait and landscape framing, plus a cold shoe for adding a light or microphone to a camera rig.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review centers on a compact clamp built for mounting a smartphone on a camera or tripod while keeping room for accessories.

Its adjustable joints and support for both portrait and landscape framing make it most relevant to mobile creators who want a configurable rig.

SMALLRIG 4382 Mount Review Summary

The quick verdict

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want portrait and landscape framing, plus a cold shoe for adding a light or microphone to a camera rig.

  • Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.

Pros

  • Supports both portrait and landscape compositions, useful for switching between vertical and horizontal video.
  • Offers two base mounting methods for fitting into different camera or tripod setups.

Consider before buying

  • The 500 g maximum requires attention to the combined weight of the phone and mounted accessories.
  • Only the phone holder is included, so a camera, tripod, microphone, light, or other rig components must be supplied separately.
Read the full review summary

The 4382 combines a 57–88 mm phone clamp with a base that attaches through a 1/4-inch-20 threaded hole or a cold shoe.

Two rotary joints provide up to 180 degrees of adjustment, while the holder can rotate between landscape and portrait orientation and lock at 90 degrees.

A cold shoe on top and threaded holes provide ways to add compatible accessories.

This is a practical option for vlogging, interviews, live-streaming, or phone photography when you want the phone positioned on a camera or tripod rather than held by hand.

Its 500 g load capacity and 73 g weight are useful planning details: check the combined load of your phone and any mounted accessories, and keep the total within the stated limit.

The buying factors

SMALLRIG 4382 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Phone-size range

The 57–88 mm width range accommodates many smartphones, including a broad set of iPhone generations.

9/10

Orientation flexibility

It supports portrait and landscape framing, with a 90-degree rotation lock and two adjustable rotary joints.

8/10

Mounting options

A 1/4-inch-20 threaded hole and a cold shoe at the base give two ways to attach the holder to a camera or tripod setup.

8/10

Accessory expansion

The top cold shoe accepts a microphone or light, and the holder also has threaded holes for compatible additions.

7/10

Load planning

The stated 500 g maximum gives a useful limit, though buyers need to account for the phone and accessories together.

8/10

Portability

At 73 g and about 4.06 by 1.63 by 1.23 inches, the holder is compact and light to carry.

Key Features and Specifications of SMALLRIG 4382 Mount

  • Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.
  • A top cold shoe supports a microphone or light; threaded holes support compatible accessories such as designated power-bank holders.
  • The stated maximum load capacity is 500 g; the holder itself weighs 73 g.

Pros and Cons of SMALLRIG 4382 Mount

Pros

  • Supports both portrait and landscape compositions, useful for switching between vertical and horizontal video.
  • Offers two base mounting methods for fitting into different camera or tripod setups.
  • Includes a top cold shoe and threaded holes for expanding a phone rig.
  • Wide stated phone-width range covers many common smartphones.

Consider before buying

  • The 500 g maximum requires attention to the combined weight of the phone and mounted accessories.
  • Only the phone holder is included, so a camera, tripod, microphone, light, or other rig components must be supplied separately.
  • Buyers should confirm that their phone's width, including any case, falls within the 57–88 mm range.

Who Should Buy SMALLRIG 4382 Mount?

Good fit

Consider the 4382 if you regularly film with a smartphone and need to reposition it between portrait and landscape framing.

The 90-degree lock and two rotary joints provide useful ways to adjust composition, while the base can connect through either a threaded mount or a cold shoe.

It also suits creators building a compact camera-side phone setup. Before adding a phone and accessories, compare their combined weight with the 500 g limit, and check that the phone fits within the clamp's width range.

The holder is light at 73 g, which may help keep a portable kit manageable.

Who should skip it

Skip this style if you need a complete filming kit in one purchase: the package includes one phone holder, while the camera or tripod and any microphone or light are separate.

It may also be a poor fit if your phone's width is outside the supported range or the combined mounted load exceeds 500 g.

How the SMALLRIG 4382 Mount fits a phone rig

Phone fit and orientation changes

The clamp's 57–88 mm width range is the first fit check, especially if you use a case.

Once mounted, it can switch between portrait and landscape and lock at 90 degrees, helping when a recording routine calls for more than one frame orientation.

Adjustability for framing

Two rotary joints allow up to 180 degrees of adjustment.

That gives room to reposition the phone relative to the camera or tripod, though the best configuration will depend on the mounting point and the space available in the rig.

Mounting and add-ons

The base accepts either a 1/4-inch-20 threaded connection or a cold shoe, and another cold shoe sits on top for a microphone or light. Threaded holes also support compatible accessories, including designated power-bank holders.

Check accessory fit and positioning before building out the rig.

Weight and practical limits

The holder weighs 73 g and has a stated 500 g maximum load. Treat that as the combined mounted-load ceiling when planning a phone-and-accessory setup; a heavier configuration may not suit this mount.

Alternatives to SMALLRIG 4382 Mount

Cell Phone Camera Mounts alternative

SMALLRIG Magnetic Metal Phone Mount 5156
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG Magnetic Metal Phone Mount 5156

Choose the 4382 if you want a conventional width-adjustable clamp and the flexibility to fit a phone by measurement.

The 5156 may suit someone with a compatible MagSafe-function iPhone who prefers magnetic attachment and a detachable accessory plate; consider its impact-related detachment caveat when deciding how you will use it.

  • The 5156 has a detachable magnetic round plate intended for compatible MagSafe-function iPhones, dual rotating shafts, a 1/4-inch-20 threaded hole or cold shoe at the base, and a stated 500 g load limit.
  • Its description also notes that external impacts may cause the device to detach.
  • The 4382 uses a width-adjustable clamp for phones from 57–88 mm and offers a cold shoe at the base as well as one on top.

Is SMALLRIG 4382 Mount Worth It?

The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for mobile creators who want adjustable portrait and landscape phone positioning, multiple mounting options, and ways to attach a light or microphone.

Its compact weight and broad phone-width range make it a flexible component for a camera or tripod rig.

Check your phone's width, case, and total mounted weight before choosing it.

The 500 g maximum and holder-only package are meaningful constraints, but for a compatible phone and a setup that stays within the limit, the combination of orientation adjustment and accessory mounts is useful.

Your review at a glance

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want portrait and landscape framing, plus a cold shoe for adding a light or microphone to a camera rig.

  • Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
  • Switches between portrait and landscape orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.

Written by

laopdr.net Editorial Team

Editorial team

laopdr.net publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG Universal Phone Holder Mount 4382

SMALLRIG Universal Phone Holder Mount 4382

A flexible phone clamp for creators who want portrait and landscape framing, plus a cold shoe for adding a light or microphone to a camera rig.

  • Fits smartphones 57–88 mm (about 2.5–3.5 inches) wide.
  • Attaches through a 1/4-inch-20 threaded hole or a cold shoe at the bottom.
Check Video Reviews on Amazon